Full length one piece chassis made from 100 x 50 x 4 mm rectangle tube. All the trailer frame is manufactured from 25 x 25 x 2mm square tube and both frame and chassis are hot dipped galvanized
The A frame is fitted with a full width stone guard and a full width mud / stone flap under the A frame to stop stones damaging under the trailer. They also carry 2 jerry cans and 2 gas bottles.
Swing arm off road independent suspension made from 100 x 50 x 4 mm rectangle tube with coil spring and twin shocks either side with 100 mm wide poly urethane bushes in front pivot points. This is possibly the strongest independent trailer suspension on the market. The jockey wheel has 2 wheels and is a strong high lift wheel. The 2 wheels make the trailer very easy to push around when not attached to a vehicle.
The body is clad with aluminium composite panel 4mm thick for light weight and strength
The fold over top is clad with aluminium chequer plate inside and outside with proper roof rack. This is a very strong floor and can carry quad bike or dingy or fire wood etc
Stainless steel slide out kitchen and drawer and storage area and stainless steel storage drawer.
Tent and Canvas
The canvas is 14oz . All panels either have a door or window with mesh and a cover of canvas which can be rolled up for air flow. The annex comes with 3 walls, roof and poly floor. All poles, pegs and tie ropes are included. The roof is attached to the camper trailer with a zip and velcrose The walls are zipped together and the roof is velcroed to the walls. The floor is velcroed to the bottom of the tent.
Series 3 - $16,000 Big Box
2 x stainless steel water tanks with 2 x 12 volt pumps on, 110lts and 70lts
Electric winch pack with 2 x 100AMP batteries placed at rear of trailer under the bed. They work in conjunction with each other, one lead goes to the electric winch in the storage box at the front and the other lead comes out near the tow hitch with an anderson plug on for charging from the car, solar panel or generator.
Queen size bed with room down either side to store glasses, phones etc.
Storage under the bed.
Strip of LED lights on the centre hoop for lighting.
Canvas on tent 14oz. Comes with fully enclosed annex and floor plus quick shade/awning for easy setup.
Large storage box on the front with fridge slide 900mm deep and 800mm wide.
Opposite side has storage boxes x 2 550mm deep x 400mm wide and 550mm high with locks.
Front storage box (Pole box) 1400 long, 500 tall and 220 wide. Floor 2/3 way down for storage and drop down door at bottom for sliding poles in and out.
15' x 6 stud wheels to suit most 4WD vehicles.
Rear tyre carrier.
Stabilizer legs at rear of the trailer.
Level legs (screw out) on hard floor for uneven surfaces
Kitchen - large slide out drawer with lift up lids and clip on tables for preparation area.There are several options for the kitchen area.
Small drawer on opposite side to kitchen for storage.
All boxes are lockable.
Stone guard on the front.
Twin jockey wheel.
Clad in aluminium composite panel, steel frame with one piece chassis hot dip galvanised.
Koya bearings - L68149/10 We carry but can be purchased from most trailer part business's
Tare - 940kgs
Length - 4.7m
Width - 1.75m
Height - 1.3m
Registration 12 months - $107.70
Offroad kit - front mud flap,front tank guard, suspension guard, water tank bash plates, Off road brake magnets. $650
16 x 6 stud wheels - $450
Rear room (kids room) - $500 (2.1m x 1.7m)
Slide drawer under the bed - $450
Cover for trailer - $200
Winch cover - $45
Solar panel 120W - $325
Solar panel 140W - $350
20AMP battery charger - $ASK
40AMP battery charger - $ASK
Matress covers/protectors - $85
240 volt sockets can be installed by contractor. Approx $360
Single lid with table attachments and tub - 0
Sinlge lid with stainless steel sink and electric tap - 0